基于虚拟相位平面的相位展开方法

在基于相位分析的三维测量系统中,为了准确地得到物体的高度,相位展开扮演着很重要的角色。传统的相位展开方法常常需要额外的投影图,而傅里叶变换轮廓术只需要采集一幅或两幅变形条纹图就可以实现对物体轮廓的测量,其方法速度快,易于实现。针对傅里叶变换轮廓术方法计算得到的截断相位分布,本文提出了一种利用截断相位与参考平面相位差值2π的整数倍数获得截断相位的正确级次,辅助相位展开的方法。当被测物体较复杂,或者相位截断次数较多时,该方法在已有参考平面相位的基础上虚拟新的相位平面,依次比较截断相位和虚拟相位,进行多次分级相位展开,结合多个展开相位结果,最终得到正确的展开相位。该方法展开速度快,展开错误不会蔓延传递。仿真和实物实验结果证明了该方法的可行性,说明该方法可用于傅里叶变换轮廓术中进行截断相位的快速展开。     

Remarks on the Born approximation and the Factorization Method

In this paper, we compare the far-field operators for the full nonlinear inverse scattering problem with the Born approximation as its linearization. The Factorization Method shows that both operators share the same behavior with respect to illposedness of the inverse problem. The results are derived for acoustic and electromagnetic scattering problems and the corresponding problem in electrical impedance tomography.     

波士顿矩阵法在河南承接产业转移中的应用

承接产业转移是加速区域经济发展的"助推器",提升产业集聚能力是提高区域产业竞争力的关键,如何科学地选择承接产业,并提升产业集聚能力是河南亟待解决的问题.选取2010年和2014年两个时点,运用产业梯度系数和产业动态集聚指数对工业进行分行业分析,并借鉴波士顿矩阵分析法将其划分为明星、金牛、问题、瘦狗和衰退等产业.根据河南的自然资源、劳动力、区位条件、市场需求等比较优势,并考虑产业集聚发展的能力,来确定河南承接产业转移的重点产业.     

Salt Metathesis: Tetrafluoroborate Anion Rapidly Fluoridates Organoboronic Acids to give Organotrifluoroborates

Tetrafluoroborate (BF₄⁻) has long been used as a spectator counter anion. Herein, we report an unprecedented salt metathesis between a variety of BF₄⁻ salts and a series of organoboronic acids yielding the corresponding organotrifluoroborates. We identified conditions for fast and efficient fluoridation (<1 h) with minimal workup. Fundamentally, this work discloses the proclivity of BF₄⁻ to exchange fluoride atoms with organoboronates, highlighting the lability of BF₄⁻.     

Dopant-free NiOx Nanocrystals: A Low-cost and Stable Hole Transport Material for Commercializing Perovskite Optoelectronics

Advancing inverted (p-i-n) perovskite solar cells (PSCs) is critical for commercial applications given their compatibility with different bottom cells for tandem photovoltaics, low-temperature processability (≤100 °C), and promising operational stability. Although inverted PSCs have achieved an efficiency of over 25 % using doped or expensive organic hole transport materials (HTMs), their synthesis cost and stability still cannot meet the requirements for their commercialization. Recently, dopant-free and low-cost non-stoichiometric nickel oxide nanocrystals (NiO_x NCs) have been extensively studied as a low-cost and effective HTM in perovskite optoelectronics. In this minireview, we summarize the synthesis and surface-functionalization methods of NiO_x NCs. Then, the applications of NiO_x NCs in other perovskite optoelectronics beyond photovoltaics are discussed. Finally, we provide a perspective for the future development of NiO_x NCs for the commercialization of perovskite optoelectronics.     

Self-Accelerating Diels–Alder Reaction for Preparing Polymers of Intrinsic Microporosity

It is a formidable challenge in polycondensation to simultaneously construct multiple covalent bonds to prepare double-stranded polymers of intrinsic microporosity (PIMs) with fused multicyclic linkages. To the best of our knowledge, this is the first study to develop a self-accelerating Diels–Alder reaction for successfully preparing double-stranded PIMs with fused multicyclic backbone structures. A self-accelerating Diels–Alder reaction was developed based on the [4+2] cycloaddition of sym-dibenzo-1,5-cyclooctadiene-3,7-diyne (DIBOD) and ortho-quinone compounds. In this reaction, the cycloaddition of ortho-quinone with the first alkyne of DIBOD activates the second alkyne, which reacts with ortho-quinone at a rate constant 192 times larger than that of the original alkyne. Using this self-accelerating reaction to polymerize DIBOD and spirocyclic/cyclic difunctional ortho-quinone monomers, a novel stoichiometric imbalance-promoted step-growth polymerization method was developed to prepare PIMs. The resultant PIMs possess intrinsic ultramicropores with pore sizes between 0.45 to 0.7 nm, high specific surface areas above 646 m² g⁻¹, and good H₂ separation performance.     

Multidisciplinary green approaches (ultrasonic,co-precipitation,hydrothermal, and microwave) for fabrication and characterization of Erbium-promoted Ni-Al2O3 catalyst for CO2 methanation

The dispersion of nickel catalysts is crucial for the catalytic ability of CO₂ methanation, which can be influenced by the fabrication method and the operation process of the catalysts. Therefore, a series of fabrication methods, including ultrasonic, hydrothermal, microwave, and co-precipitation, have been applied to prepare 25Ni-5Er-Al₂O₃ catalysts. The fabrication method can partially influence the structural and catalytic activity of the nickel aluminate catalysts. Among the catalysts modified by Erbium prepared with various methods, the catalyst fabricated by ultrasonic pathway exhibited better catalytic performance and CH₄ selectivity especially, at a temperature (400 ℃). The impact of the temperature of the reaction (200–500 °C) was examined under a stoichiometric precursor ratio of (H₂:CO₂) = 4: 1, atmospheric pressure, and space velocity (GHSV) of 25000 mL/gcath. The results demonstrate that the ultrasonic method is strongly efficient for fabricating Ni-based catalysts with a high BET surface area of about 190.33 m²g^?1. The catalyst composed via the ultrasonic technique has 69.38 % carbon dioxide conversion and 100 % methane selectivity at 400 °C for excellent catalytic performance in CO₂ methanation reactions. The fabrication effect can be associated with its high surface area, which is achieved via the hot spot mechanism. Besides, the addition of Erbium promotes the Ni dispersion on the supports and stimulates the positive reaction because of the erbium oxygen vacancies.     

涡旋提取-改进BCR法测定土壤中重金属的化学形态

土壤中重金属的化学形态更能表明其迁移性和生物毒性。传统的重金属化学形态检测方法BCR法由于其提取时间长,影响检测效率。采用涡旋提取对传统BCR法进行方法优化,对土壤中Cu、Zn、Pb、Cd、Ni、Cr等6种重金属元素化学形态进行了实验分析。研究了涡旋转速、涡旋时间以及涡旋提取的方法精密度与准确度。结果表明,当涡旋转速为2500rpm,酸可交换态涡旋10min,可还原态涡旋10min,可氧化态涡旋5min时,涡旋提取效果良好。采用土壤标准物质对方法的适用性进行了验证,6种元素的检出限在0.4?32μg/kg,测定值均在标准值范围内,相对标准偏差在0.3%?5.5%之间。涡旋提取-改进BCR法分析速度快,灵敏度高,能满足同时测定土壤中多种金属元素化学形态的检测要求。     

重量法测定土壤水溶性盐总量的优化

土壤水溶性盐是表征土壤盐碱化程度的重要指标,也是评价耕地地力的重要参数,被纳入第三次全国土壤普查（“三普”）监测指标体系中。重量法是测定土壤水溶性盐总量的最常用方法,其测定过程易受多种因素影响,导致其测定结果不准。鉴于此,本文设计试验分别验证了水溶性盐浸提和浸提液固液分离这两个过程对测定结果的影响,结果表明浸提液固液分离是影响土壤水溶性盐总量测定准确度和精密度的主要因素。基于此进一步探究4种不同固液分离方式（布氏漏斗过滤、滤膜真空抽滤、离心、滤纸组合过滤）对测定结果的影响,结果表明相较于其它方式,滤纸组合过滤测定结果准确度高,适用于土壤水溶性盐总量的测定。对改进后的重量法测定土壤水溶性盐总量进行方法学确认,结果表明其检出限为0.01 g/kg,测定下限为0.04 g/kg;方法的准确度和精密度、适用范围等均符合相关要求。本文推荐的土壤水溶性盐总量测定方法为：土壤样品采用1:5土水比浸提,180 r/min振荡3 min,浸提液采用滤纸组合自然过滤;其测定结果的准确度和精密度符合相关要求。本文旨在为“三普”内业检测提供参考和借鉴,为全面摸清不同区域土壤水溶性盐含量水平及土壤盐渍化程度提供技术支撑。     

A comparative study of CE-SDS,SDS-PAGE,and Simple Western: Influences of sample preparation on molecular weight determination of proteins

The development of capillary electrophoresis, especially CE-SDS devices, has led CE-SDS to become an established tool in a wide range of applications in the analysis of biopharmaceuticals and is increasingly replacing its method of origin, SDS-PAGE. The goal of this study was to evaluate the comparability of molecular weight (MW) determination especially by CE-SDS and SDS-PAGE. For ensuring comparability, model proteins that have little or no posttranslational modifications and an IgG antibody were used. Only a minor influence of sample preparation conditions, including sample buffer, temperature conditions, and different reducing agents on the MW determination were found. In contrast, the selection of the MW marker plays a decisive role in determining the accurate apparent MW of a protein. When using different MW markers, the deviation in MW determination can exceed 10%. Interestingly, CE-SDS and 10% SDS-PAGE hardly differ in their trueness of MW determination. The trueness in relation to the reference MW for each protein was calculated. Although the trueness values for the model proteins considered range between 1.00 and 1.11 using CE-SDS, they range between 0.93 and 1.03 on SDS-PAGE, depending on the experimental conditions chosen.